Navan Chauhan
New Member
Tested on: iOS6 (should work with others too)
Pre-requisites:
You must have the following installed on your jb device:
SSH METHOD
Pre-Requisites for this step:
For Unix/Linux users (This includes Mac users)
Presuming the IPA is stored in the Downloads folder, run the following commands
Your Application would be on the home screen now
For Windows Users:
Assuming you have correctly installed PuTTY SCP ( Follow all the steps written in this https://it.cornell.edu/managed-servers/transfer-files-using-putty )
Copy the IPA to C:
open CMD
pscp c:\YOUR_IPA_NAME.ipa root@192.168.x.x:/var/mobile/Documents (password is alpine)
Start PuTTY
enter the IP address in the hostname
user as root
password as alpine
Click Open/Start/Run
Click Yes
now enter the following command
cd /var/mobile/Documents
ipainstaller YOUR_IPA_NAME.ipa
Your Application would be on the home screen now
I'll update the guide with other methods soon
Pre-requisites:
You must have the following installed on your jb device:
- AppSync
- ipainstaller
SSH METHOD
Pre-Requisites for this step:
- If you have a Mac or run any Linux/Unix based Distro then you don't need to install anything
- If you have a Windows system install PuTTY and PuTTY SCP
- On the device you wish to install the IPA, go to Settings>WiFi>Click on the connected wifi name>Note Down the ip address, it'll be in the format of 192.168.x.x (replace x.x with your values)
For Unix/Linux users (This includes Mac users)
Presuming the IPA is stored in the Downloads folder, run the following commands
- Fire up the terminal (Mac users, search for terminal in the spotlight search)
- scp ~/Downloads/YOUR_IPA_FILE.ipa root@192.168.x.x:/var/mobile/Documents
- (The password is alpine <The password won't be shown while typing> )
- Then, enter these commands
- ssh root@192.168.x.x (Enter the password)
- cd /var/mobile/Documents
- ipainstaller YOUR_IPA_FILE.ipa
Your Application would be on the home screen now
For Windows Users:
Assuming you have correctly installed PuTTY SCP ( Follow all the steps written in this https://it.cornell.edu/managed-servers/transfer-files-using-putty )
Copy the IPA to C:
open CMD
pscp c:\YOUR_IPA_NAME.ipa root@192.168.x.x:/var/mobile/Documents (password is alpine)
Start PuTTY
enter the IP address in the hostname
user as root
password as alpine
Click Open/Start/Run
Click Yes
now enter the following command
cd /var/mobile/Documents
ipainstaller YOUR_IPA_NAME.ipa
Your Application would be on the home screen now
I'll update the guide with other methods soon
Attachments
Last edited: